Automatic spring tester for any spring
Our fully automatic spring tester allows you to check the spring rate of any fork or shock absorber. Track performance data wirelessly in real-time.
![LABA7 Spring Rate Tester Range + PRO Range of LABA7 spring rate testers](https://laba7.com/wp-content/uploads/2024/02/LABA7-Spring-Rate-Tester-Range-PRO.webp)
Shock spring tester – workshop’s must-have
LABA7 spring test machines are developed having suspension professionals in mind. They are being used in workshops, springs manufacturers as well as motorsport teams.
Our automatic spring dynos enable you to test any spring of any shock, whether it is a fork spring, air spring, bump stop, or even gas pressure. They are very easy to use and provide the most accurate results immediately on the screen of your device.
Spring rate dyno DAILY
Adjustable stroke | 0-300mm |
Maximum allowed force | 10 000N |
Free rear spring length | 374mm (easy to customize) |
Free front spring length | 564mm (easy to customize) |
Dimensions | 642x1904x570 |
Weight | 200 kg |
Fully automatic spring rate tester for shock springs, fork springs, air springs, coils, and bump stops of any size. Whether you are working with MTBs, motorcycles, cars, off-road trucks, or race cars, all springs can be tested. Custom adapters can be used to test springs up to 1000mm.
Price: 3 800 EUR
![LABA7 Spring rate tester LABA7 Spring rate tester](https://laba7.com/wp-content/uploads/2023/06/LABA7-Spring-rate-tester.webp)
Spring rate dyno MINI
Adjustable stroke | 0-150mm |
Maximum allowed force | 10 000N |
Free rear spring length | 305mm (easy to customize) |
Free front spring length | 430mm (easy to customize) |
Dimensions | 505×957×310 |
Weight | ~70kg |
Sharing the majority of the features makes it the compact version of the LABA7 spring rate dyno. Even though the Mini has a smaller stroke it still can be a very powerful tool at your disposal. It can test rates of the most common shock springs, forks springs, air springs, and bump stops.
Price: 3 000 EUR
![LABA7 Mini Spring rate tester LABA7 Mini Spring rate tester](https://laba7.com/wp-content/uploads/2023/06/LABA7-Mini-Spring-rate-tester.webp)
Spring rate dyno PRO
Stroke | 0-350mm |
Maximum allowed force | 15 000N |
Motor | Electromechanical (220V/110V) |
Spring length | Easilly adjustable |
Dimensions | 642×2144×570 mm |
Weight | 200 kg |
The most powerful spring rate tester in the LABA7 range. Its principal components are reinforced to accommodate massive loads. We designed this machine for end-of-the-line testing of coilovers, springs, and other rebounding suspension parts. Perfect for manufacturers and workshops specializing in high-performance suspensions.
Price: 8 000 EUR
![Spring rate tester PRO Spring rate tester PRO by LABA7](https://laba7.com/wp-content/uploads/2024/01/Spring-rate-tester-PRO-by-LABA7.webp)
No more limits – spring dyno adapters
With a focus on versatility and clients, we supply a range of adapters for our spring rate testers. Their range covers any type of vehicle from MTBs to 4x4s: motorcycles, circuit racing, and dirt track racing vehicles.
Adapters are not compatible with the spring tester PRO.
![Spring dyno shock absorber for motocar adapter Spring dyno shock absorber for moto/car adapter](https://laba7.com/wp-content/uploads/2023/07/Spring-dyno-shock-absorber-for-motocar-adapter.webp)
![Spring rate tester - Moto adapter kit - Fork adapter for 54 mm and 56 mm forks Spring rate tester - Moto adapter kit - Fork adapter for 54 mm and 56 mm forks](https://laba7.com/wp-content/uploads/2023/07/Spring-rate-tester-Moto-adapter-kit-Fork-adapter-for-54-mm-and-56-mm-forks.webp)
![Spring rate tester - MTB adapter kit - Fork adapter Spring rate tester - MTB adapter kit - Fork adapter](https://laba7.com/wp-content/uploads/2023/07/Spring-rate-tester-MTB-adapter-kit-Fork-adapter.webp)
![Spring rate tester - MTB/Moto adapter kit - Self-preload clevis and U-Clamp for rear shocks Spring rate tester - MTB/Moto adapter kit - Self-preload clevis and U-Clamp for rear shocks](https://laba7.com/wp-content/uploads/2023/07/Spring-rate-tester-Moto-adapter-kit-Self-preload-clevis-and-U-Clamp-for-rear-shocks.webp)
Accurate by design
LABA7 spring rate dynos not only allow you to adjust the stroke and speed of the machine, but they are developed to be accurate and precise from the ground up.
Perfect spring measurement requires an extremely slow linear motion. Our spring testers use mechanical motors that compress springs vertically as slow as 5 mm per second. This ensures the collection of the most reliable data.
On top of that load cell in LABA7 machines is located on top of the vertical shaft. This solution drastically improves the accuracy of measurements as it eliminates friction caused by the bushing.
![Spring rate tester wireframe Spring rate tester wireframe](https://laba7.com/wp-content/uploads/2023/07/Spring-rate-tester-wireframe.webp)
Advantages of LABA7 spring testers
Fully automatic
As with all LABA7 equipment, spring testers are built with simplicity in mind. Place a spring, fork, or coil into the machine, choose the settings, and it will run the test. Analyze the performance through the force vs displacement graph and progressiveness of the spring.
Wireless connectivity
Connect the spring tester to your device via a local Wi-Fi network or a USB cable. Both ways allow you to track performance in real-time.
Safety
During the spring rate test, it is affected by a tremendous amount of force. In case of a faulty spring, the outcome can be dire. To protect the operator and the workshop, both LABA7 spring rate dynos are equipped with Plexiglass shield and steel casings.
MTB and motorcycle fork adapters
To meet the needs of our customers, LABA7 spring testers come equipped with special adaptors for MTB or motorcycle forks. Self-preload clevis and U-shaped mount for rear shocks have special plastic heads to protect tested units from damage.
Custom mounts
If you are testing springs, forks, or coils of unconventional sizes, there is a possibility to develop custom mounts for them. Please contact us for more information.
Seal drag testing
Both of our spring compression testers can be used as spring tension testers as well. The seal drag test measures the force needed to move suspension components and maintain a seal to prevent contamination. It’s important to ensure the proper function and longevity of the suspension system.
Benefits of LABA7 spring rate tester
Know your springs
Measure the exact force created by the springs, forks, and coils. As there is no universal measurement protocol every manufacturer does it slightly differently. Some measure the springs with a little preload, while others don’t, thus declared spring rate of both may differ. Knowing the precise spring rate will help to choose the right spring according to the weight of the athlete, bike, or car.
Test bump stops
LABA7 spring rate dyno also can measure the force of the bump stops. Bump stops are important because they prevent damage to the suspension system and maintain consistent handling. They also help to absorb vibrations and provide a smoother ride.
![Spring dyno - MOTO fork Spring dyno](https://laba7.com/wp-content/uploads/2024/04/Spring-dyno-MOTO-fork.webp)
Measure air springs
Test the real force created by air springs of MTB and motorcycle forks.
Measure bearing friction
Using our spring rate dyno, you can measure and evaluate the forces differences between individual bearings. Manufacturers of shock absorbers, forks, and coils pay a lot of attention to friction because it creates an unwanted and uncontrolled force. LABA7 spring rate tester enables you to select seals that create the least friction and increase the efficiency of your suspension.
Reports and labels
If you are working with many different springs, forks, and coils, our spring-testing machines can help to mark them quickly. Print the report label with spring force after the test that includes force generated in kN.
![Spring rate tester - MTB fork Spring rate tester](https://laba7.com/wp-content/uploads/2024/04/Spring-rate-tester-MTB-fork.webp)
LABA7 spring dyno software
![LABA7 spring dyno software LABA7 spring dyno software](https://laba7.com/wp-content/uploads/2023/06/laba7-spring-dyno-software-1.png)
Why is it important to test springs?
Even identically looking springs can perform differently. It can be affected by both used materials and manufacturing processes. For riders, testing springs ensure using the right spring for their weight. For drivers, it allows impact performance of the car by simply choosing the right spring for the right corner of the car.
It is also worth mentioning that this device can be coil spring tester as well.
![Test springs](https://laba7.com/wp-content/uploads/2024/04/Test-springs.webp)
More LABA7 products:
Shock dynos
![Shock Dyno Icon](https://laba7.com/wp-content/uploads/2023/05/Shock-Dyno-Icon.png)
Vacuum bleed pumps
![Vacuum pump icon](https://laba7.com/wp-content/uploads/2023/05/Vacuum-pump-icon.png)
Race car scales
![scale pads icon](https://laba7.com/wp-content/uploads/2023/05/scale-pads-icon.png)
Suspension tools
![shock absorber Icon 80px Design](https://laba7.com/wp-content/uploads/2023/06/shock-absorber-Icon-80px.png)